How to Install the SimpliFire Format Wall-Mount Electric Fireplace

If there were a way to take the pain out of installing a fireplace, would you be more inclined to add one? We thought you might. Bringing ambiance to your space has never been easier. Now, with just a few tools, a well-placed electrical outlet and the revolutionary wall-mount SimpliFire Format electric fireplace, you can bring the comfort of a fireplace to any room in your home. Forget the hassle of gas lines, venting, and construction—the Format has you covered so you can go from installing to recharging in as little as an afternoon.

Before getting started with your project, ensure you have access to electricity. We recommend hiring a professional to move any electrical outlets so that the SimpliFire Format can be installed with the mantel hiding the outlet. This fireplace can be installed on either a masonry wall or framed wall like the one we use in this how-to.

Before you begin, gather the following tools and supplies:

• Tape measure
• Pliers
• Hammer
• Gloves
• Level
• Square
• Magnetic Phillips screwdriver
• Safety glasses
• Drill
• Product manual
• Pencil

Start by removing the wall-mount bracket from the back of the fireplace. You’ll need to remove the two screws on either side of the appliance, as well as two screws on the back of it. As you decide on placement of the bracket on the wall, ensure that it’s level and then mark the holes with a pencil.

Using your stud finder, identify at least two places with a solid structural element behind it. You’ll mark these as the locations to attach a screw. The rest should be attached with wall board toggle-bolt anchors.

Once you’ve fastened the mounting bracket to the wall, you can hang your fireplace. It’s best to work with another person for this step. Work together to place the fireplace on the tabs of the mounting bracket and finish securing the fireplace to the wall by attaching the two safety retainers.

Next, attach the floating mantel. First, slide the bottom mantel into place. Connect the bottom mantel wire connection to the appliance wire connector on the bottom of the fireplace. Then, fasten the bottom mantel section to the fireplace.

Now slide in the side panels, first connecting the wire harness.

Slide on the top mantel and fasten it to the fireplace with the thumb screws.

Finally, deck out your fireplace with the included media. For crystal media, add and arrange it now. If you’re opting for the one-piece ShadowGlo™ Alpine Timber Log Set, simply place it directly onto the ember bed. (Both options are included with the fireplace.)

Now, plug the power cord into the receptacle and secure the cords out of the line of vision.

Use the remote to adjust the flame and effects, including heat, thermostat, timer, brightness, ember bed lights and accent lighting. Turn up the heat for cool days or enjoy the fireplace simply for its calming ambiance while the weather’s warm.

The SimpliFire Format is ready to stun no matter the time of year. SimpliFire electric fireplaces come in both wall-mounted and recessed styles. Consult with a pro for help making the right selection for your space.